We are the #1 pool repair company in Pompano Beach FL. We install pool pump brands like Hayward and Pentair as well as Jacuzzi and Jandy. Our services include pool pump and heater repairs as well as resurfacing and leak detection for residential and commercial pools in Pompano Beach FL.
We bring 13 years of experience across installation and business development as well as project management. We know what it takes to get the job done right. Pool equipment sits outside year round through hot South Florida summers and stormy hurricane seasons. We install products built to last. Most of the products we install come with manufacturer warranties.
The crew renewed the pool interior with standard plaster. Preparation and application took 6 days. Startup and curing care took another 28 days. Filling and brushing follow the chosen finish’s instructions; swimming clearance is confirmed separately.
The project involved a leaky pool pump. The homeowner chose a variable speed pump. The crew installed the pump and agreed connections in 1 day. The equipment is matched to the existing circulation system.
The pool needed a refill every couple of days. A 2 hour detection visit investigated the water loss and narrowed the suspected leak location. The edited comparison illustrates a dye test. The $450 charge covers detection. Any repair is priced separately.
A noisy or leaking pump may need a targeted repair. We check the seals and housing as well as the motor and connected plumbing before recommending parts. The aim is to address the cause of weak circulation or water loss. Sound equipment does not need to be replaced just because one serviceable component has failed.
View service
Replacement makes sense when the condition or parts cost supports it. We compare a suitable pump with the existing filter and heater as well as the plumbing and controls. Your pool use also matters when setting up operation. The estimate identifies the model and connection work so you can compare the complete installation.
View service
A fresh interior starts with the condition of the old surface. We assess roughness and loose material along with your preferred finish before setting the scope. Plaster and quartz options as well as pebble finishes have different textures and care needs. Tile and coping work as well as underlying repairs are discussed separately when they are outside the finish work.
View service
We assess heaters that shut down or show faults as well as those that fail to maintain the expected temperature. The model and its circulation and controls help guide the diagnosis. We compare repair options with replacement where appropriate. Work on electrical or gas equipment requires the appropriate trade. Refrigerant work also needs a qualified technician.
View service
Frequent refills deserve an explanation. We review the water loss pattern and inspect the pool fittings and equipment along with the connected plumbing. Appropriate tests help locate the likely source before a repair is proposed. We scope diagnosis and repair separately so you know the next step before work begins.
View service
The filter needs to work with the pump and pool demand. We assess seals and valves as well as serviceable media alongside the pressure vessel itself. A worn gasket can be a repair; a cracked tank is different. Replacement options must suit the actual circulation system and allow practical access for maintenance.
View service
A shared pool needs reliable circulation and a repair plan that fits its operation. We review pump components and the connected filtration system with the operator. Proposed repairs identify the parts and expected shutdown. We consider applicable review requirements before changing equipment on a shared pool.
View service
A commercial replacement must match the installation and operating requirements. We review equipment information and review the controls and connections before comparing options. Motor size alone is not a complete specification. The written scope identifies plumbing or electrical changes and provides a basis for scheduling the closure with the property team.
View serviceCondo and hospitality properties need finish work planned around a closure. We assess the interior and fittings to determine what preparation is needed before discussing materials. Operator coordination and applicable health review are part of the project plan. Startup and inspections as well as reopening are separate from the day the new finish is applied.
View serviceShared pool heating needs depend on the equipment and operating demand. We assess the fault alongside circulation and connected controls. The proposal explains compatible parts and any required installation changes. Repairs and testing depend on site access and the property schedule. Some repairs also need a qualified trade.
View serviceRefill records and operating logs can help explain a shared pool’s water loss. We review that information before selecting appropriate tests for fittings and equipment as well as plumbing. Access and safe closure are agreed with the operator. Findings then support a defined repair scope.
View service
Commercial filtration needs a system level assessment. We review the pressure equipment and serviceable components as well as the connection layout before proposing work. Safe shutdown and access are coordinated with the property operator. The estimate should distinguish a damaged vessel replacement from a seal repair.
View service| Service | Typical price range |
|---|---|
| Leak DetectionDiagnostic testing. Any repair is quoted separately. | $400 to $700 |
| Pool ResurfacingPreparation and finish depend on the pool and the work required. | $5200 to $12000 |
| Pool Pump ReplacementThe quote depends on the pump and the work needed to connect and install it. | $1900 to $5000 |
| Miscellaneous Pool RepairsGasket and seal repairs as well as smaller fitting repairs. Parts and scope vary. | $150 to $500 |
| Service | Typical price range |
|---|---|
| Commercial pump repair or replacementFlow and controls plus access and shutdown scope | Equipment quote |
| Commercial heater repairEquipment model and power source plus the fault and parts | Equipment quote |
| Commercial resurfacingFinish and preparation plus reopening requirements | Measured quote |
| Commercial leak detectionPlumbing circuits and water features plus test access | Testing quote |
These are planning ranges. The final quote depends on equipment and access as well as the work required. Commercial systems are assessed individually.
A backyard concrete pool and a shared condo pool can need different repairs even when their dimensions are similar. Before work begins we check the shell and finish along with equipment access. We also look for a spa or sun shelf.
Pompano Beach listings report private pools measuring 15 × 20 ft and 15 × 30 ft as well as 15 × 40 ft. These are examples from individual properties. A rectangular 15 × 30 ft pool covers 450 sq ft at the waterline. Resurfacing measurements include the floor and walls as well as steps and benches.
A city parcel analysis puts the median single family home at 1483 sq ft and the median condo at 1100 sq ft. Houses average 1630 sq ft and condos average 1191 sq ft. For repairs we check side yard access and equipment clearance at the property. We also confirm equipment room access and shutdown windows at condo buildings.
Check the property jurisdiction and scope with Pompano Beach Building Inspections before changing structural components or plumbing. Do the same before changing electrical or gas components. The city coordinates trade applications under its one permit process. Shared pools subject to public pool rules may need separate Broward County health review before reopening.
Planning ranges follow the Orlando Pool Repair Pro guide. The final quote depends on equipment and access as well as the scope of work. Commercial systems are assessed individually.
Tell us what changed and describe the property and equipment involved. Photos of labels and the work area help prepare for the visit.
Assess the condition and use appropriate checks to narrow the issue. Identify a leak or structural concern separately from surface wear.
Explain the findings and discuss a targeted repair or suitable replacement. Discuss finish choices when relevant. Make inclusions and separate work clear.
Confirm access and make sure the parts and timing are right. Account for the property operator and applicable review before a commercial closure or equipment change.
Complete the agreed work and check the relevant operation. Review the result against the approved scope before handing the project back.
Review operating settings or finish care. Explain startup and return to use conditions when they apply to the selected work.
Yes. Home pool repairs and shared pool projects have different equipment and operating needs. The four service pages explain the work and where a separate commercial plan is needed.
We assess the failed component and the condition of the full system. The recommendation depends on finding compatible parts and assessing the complete cost.
Check the property jurisdiction and scope with Pompano Beach Building Inspections before changing structural components or plumbing. Do the same before changing electrical or gas components. The city coordinates trade applications under its one permit process. Shared pools subject to public pool rules may need separate Broward County health review before reopening.
No. Detection is the testing and findings. The repair may need its own estimate for parts or excavation or finish work.
Not automatically. The estimate should name the interior finish and explain whether tile and coping as well as deck work and underlying repairs are included.
It depends on the work. New finishes have startup and water care requirements; public pools may also have reopening conditions. Follow the specific project instructions.
